2012 Chrysler 300 Owner Manual - Page 191

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 189 The Headlights On with Wipers feature can be turned on and off using the Uconnect Touch™ System, refer to "Uconnect Touch™ Settings" in "Understanding Your Instrument Panel" for further information. Rain Sensing Wipers - If Equipped This feature senses moisture on the windshield and automatically activates the wipers for the driver. The feature is especially useful for road splash or over spray from the windshield washers of the vehicle ahead. Rotate the end of the multifunction lever to one of four settings to activate this feature. automatically change between an intermittent wipe, slow wipe and a fast wipe depending on the amount of moisture that is sensed on the windshield. Place the wiper switch in the OFF position when not using the system. The Rain Sensing feature can be turned on and off using the Uconnect Touch™ System, refer to "Uconnect Touch™ Settings" in "Understanding Your Instrument Panel" for further information. 3 NOTE: • The Rain Sensing feature will not operate when the wiper speed is in the low or high position. The sensitivity of the system can be adjusted with the multifunction lever. Wiper delay position 1 is the least • The Rain Sensing feature may not function properly sensitive, and wiper delay position 4 is the most sensiwhen ice or dried salt water is present on the windtive. Setting 3 should be used for normal rain conditions. shield. Settings 1 and 2 can be used if the driver desires less wiper sensitivity. Settings 4 can be used if the driver • Use of Rain-X௡ or products containing wax or silicone may reduce rain sensor performance. desires more sensitivity. The rain sense wipers will