2012 Chrysler 300 Owner Manual - Page 342
2012 Chrysler 300 Manual
Page 342 highlights
340 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: In cold weather, use of Recirculation mode may lead to excessive window fogging. On systems with Manual Climate Controls, the Recirculation mode is not allowed in Defrost mode to improve window clearing operation. Recirculation will be disabled automatically if this mode is selected. Attempting to use Recirculation while in this mode will cause the LED in the control button to blink and then turn off. 2. Next, adjust the temperature you would like the system to maintain by adjusting the driver and passenger temperature hard or soft control buttons (6, 7, 10, 11). Once the desired temperature is displayed, the system will achieve and automatically maintain that comfort level. 3. When the system is set up for your comfort level, it is not necessary to change the settings. You will experience the greatest efficiency by simply allowing the system to function automatically. Automatic Temperature Control (ATC) ATC Hard-keys are located in the center of the instruNOTE: ment panel. • It is not necessary to move the temperature settings for cold or hot vehicles. The system automatically adjusts Soft-keys are accessible on the Uconnect Touch™ system the temperature, mode and blower speed to provide screen. comfort as quickly as possible. Automatic Operation • The temperature can be displayed in U.S. or Metric 1. Press the AUTO hard-key or soft-key button on the units by selecting the US/M customer-programmable Automatic Temperature Control (ATC) Panel. feature. Refer to the "Uconnect Touch™ System Settings" in this section of the manual.