2012 Chrysler 300 Owner Manual - Page 337

UNDERSTANDING YOUR INSTRUMENT PANEL 335 Performing this function will cause the automatic opera- position. Blower control should be left in the "ON" tion to switch into manual mode and the AUTO indicator position to allow the climate control to either warm or cool the vehicle will turn off. Hard-key 2. Recirculation Button Press and release to change the current setting, the The blower speed increases as you turn the control clockwise from the lowest blower setting. The blower indicator illuminates when ON. speed decreases as you turn the knob counter-clockwise. 3. Blower Control Blower control is used to regulate the amount of air Soft-key - Uconnect Touch™ System 4.3 (If Equipped) forced through the climate system. There are seven Press the blower soft-key to enter the blower setting blower speeds available. Adjusting the blower will cause screen. Once in the blower settings screen use the UP and automatic mode to switch to manual operation. The DOWN arrows to adjust the blower speed setting, or speeds can be selected using either hard-keys or soft-keys directly select the speed setting by pressing the blower as follows: bar area around the blower icon. The blower speed increases as you press the UP arrow or move clockwise NOTE: For vehicles equipped with Remote Start, the on the setting scale and decreases when press the DOWN climate controls will not function during Remote Start arrow or move counter-clockwise on the setting scale. operation if the blower control is left in the "O" (Off) 4