2012 Chrysler 300 Owner Manual - Page 351

STARTING AND OPERATING 349 CAUTION! (Continued) • Shift into or out of REVERSE only after the vehicle has come to a complete stop and the engine is at idle speed. • Do not shift from REVERSE, PARK, or NEUTRAL into any forward gear when the engine is above idle speed. • Before shifting into any gear, make sure your foot is firmly on the brake pedal. Normal Starting Using The ENGINE START/STOP Button NOTE: Normal starting of either a cold or a warm engine is obtained without pumping or pressing the accelerator pedal. To start the engine, the transmission must be in PARK or NEUTRAL. Press and hold the brake pedal while pressing the ENGINE START/STOP button once. The system takes over and attempts to start the vehicle. If the vehicle fails to start, the starter will disengage automatically after Keyless Enter-N-Go This feature allows the driver to oper- 10 seconds. If you wish to stop the cranking of the engine ate the ignition switch with the push prior to the engine starting, press the button again. of a button, as long as the Remote To Turn Off The Engine Using ENGINE Keyless Entry (RKE) transmitter is in START/STOP Button the passenger compartment. 1. Place the shift lever in PARK, then press and release the ENGINE START/STOP button. 5