2004 Dodge Ram 3500 Pickup Owner's Manual - Page 19

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 2. Fasten your seat belt (Fastening the seat belt will cancel any chiming that may confuse you during this programming procedure). 3. Place the key into the ignition. 4. Within 10 seconds cycle the key from the OFF position to the ON position four times; ending in the ON position ( Do not start the engine ). 5. Within 30 seconds, press the driver's door lock switch in the LOCK direction. 6. A single chime will be heard to indicate the feature has been disabled. 7. To reactivate this feature, repeat the above steps. 8. If a chime is not heard, program mode was canceled before the feature could be disabled. If necessary, repeat the above procedure. Auto Unlock Feature This feature unlocks all the doors of the vehicle when the driver's door is opened first. The following conditions must be met: • The driver's door must be opened first. • The Automatic Door Lock feature must be enabled. • The doors of the vehicle must be locked automatically by the Automatic Door Lock feature. • The vehicle is in P (Park) and the ignition switch is in the Off position. This feature will not operate if any of the conditions above are not met or following has occurred: • Any manual operation of a door lock switch has occurred. 2