2004 Dodge Ram 3500 Pickup Owner's Manual - Page 350

Clutch Linkage

If the clutch pedal linkage begins to squeak or grunt, the

clutch pedal pivot bushings should be lubricated. Refer

to Recommended Fluids, Lubricants and Genuine Parts

for the correct lubricant type.

Propeller Shaft Universal Joints

Cross Type (No fittings) —

Relubrication of this type of

universal joint is not required. The seals should be

inspected for external leaks or damage. If external leaks

or damage is evident, the universal joint should be

replaced.

Rear Axle And 4x4 Front Driving Axle Fluid Level

Refer to Recommended Fluids, Lubricants and Genuine

Parts for the correct Fluid type. For normal service,

periodic fluid level checks are not required. When the

vehicle is serviced for other reasons the exterior surfaces

of the axle assembly should be inspected. If gear oil

leakage is suspected inspect the fluid level.

This inspection should be made with the vehicle in a level

position. The fluid level should be even with the bottom

of the fill hole for the Manufacturer’s C205F HD Front

Axles. The fluid level should be 5/8” (16 mm) below on

9 1/4” Manufacturer’s Rear Axles.

For all 2500/3500 Model axles, the fluid level should be

1/4” ² 1/4” (6.4 mm ² 6.4 mm) below the fill hole on the

9.25” Front and 3/4”² 1/4” (19 mm ² 6.4 mm) on 10.5”

Rear axles. The 11.5” Rear Axle level should be 1/4” ²

1/4” (6.4 mm ² 6.4 mm) below the fill hole.

Drain and Refill

Vehicles operated in normal service do not have regularly

scheduled oil changes. If fluid has become contaminated

with water or to provide the correct viscosity grade, drain

and refill.

Lubricant Selection

Refer to Recommended Fluids, Lubricants and Genuine

Parts for correct fluid type.

350

MAINTAINING YOUR VEHICLE

2004 Dodge Ram 3500 Pickup Owner's Manual - Page 350

2004 Dodge Ram 3500 Pickup Manual

Page 350 highlights