2012 Dodge Charger Owner Manual SRT8 - Page 20

18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE triggers the alarm, the Vehicle Security Alarm will provide the following audible and visible signals: the horn will pulse, the park lamps and/or turn signals will flash, and the Vehicle Security Light in the instrument cluster will flash. Rearming Of The System If something triggers the alarm, and no action is taken to disarm it, the Vehicle Security Alarm will turn the horn off after three minutes, turn all of the visual signals off after 15 additional minutes, and then the Vehicle Security Alarm will rearm itself. To Arm The System Follow these steps to arm the Vehicle Security Alarm: • For vehicles not equipped with Keyless Enter-N-Go, make sure the vehicle ignition system is ЉOFFЉ and the key is physically removed from the ignition. 2. Perform one of the following methods to lock the vehicle: • Press LOCK on the interior power door lock switch with the driver and/or passenger door open. • Press the LOCK button on the exterior Passive Entry Door Handle with a valid Key Fob available in the same exterior zone (refer to ЉKeyless Enter-N-GoЉ in ЉThings To Know Before Starting Your VehicleЉ for further information). • Press the LOCK button on the Remote Keyless Entry 1. Remove the key from the ignition system (refer to ЉStarting ProceduresЉ in ЉStarting And OperatingЉ for (RKE) transmitter. further information). 3. If any doors are open, close them. • For vehicles equipped with Keyless Enter-N-Go, make sure the vehicle ignition system is ЉOFFЉ.