2012 Dodge Charger Owner Manual SRT8 - Page 455
2012 Dodge Charger Manual
Page 455 highlights
WHAT TO DO IN EMERGENCIES 453 (B) Setting Up To Use TIREFIT: 1. Turn the Mode Select Knob (5) to the Sealant Mode position. (C) Injecting TIREFIT Sealant Into The Deflated Tire: • Always start the engine before turning ON the TIREFIT kit. 2. Uncoil the Sealant Hose (6) and then remove the cap NOTE: Manual transmission vehicles must have the from the fitting at the end of the hose. parking brake engaged and the shift lever in NEUTRAL. 3. Place the TIREFIT kit flat on the ground next to the • After pressing the Power Button (4), the sealant (white deflated tire. fluid) will flow from the Sealant Bottle (1) through the 4. Remove the cap from the valve stem and then screw Sealant Hose (6) and into the tire. the fitting at the end of the Sealant Hose (6) onto the NOTE: Sealant may leak out through the puncture in valve stem. the tire. 5. Uncoil the Power Plug (8) and insert the plug into the If the sealant (white fluid) does not flow within 0 - vehicle's 12 Volt power outlet. 10 seconds through the Sealant Hose (6): NOTE: Do not remove foreign objects (e.g., screws or 1. Press the Power Button (4) to turn Off the TIREFIT kit. nails) from the tire. Disconnect the Sealant Hose (6) from the valve stem. Make sure the valve stem is free of debris. Reconnect the 6