2012 Dodge Charger Owner Manual SRT8 - Page 222

220 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Resume Speed To resume a previously set speed, push the RES (+) button and release. Resume can be used at any speed above 20 mph (32 km/h). To Vary The Speed Setting When the Electronic Speed Control is set, you can increase speed by pushing the RES (+) button. If the button Pressing the SET (-) button once will result in a 1 mph is continually pressed, the set speed will continue to (1.6 km/h) decrease in set speed. Each subsequent tap of increase until the button is released, then the new set the button results in a decrease of 1 mph (1.6 km/h). speed will be established. To Accelerate For Passing Pressing the RES (+) button once will result in a 1 mph Press the accelerator as you would normally. When the (1.6 km/h) increase in set speed. Each subsequent tap of pedal is released, the vehicle will return to the set speed. the button results in an increase of 1 mph (1.6 km/h). Using Electronic Speed Control On Hills The transmission may downshift on hills to maintain the vehicle set speed. To decrease speed while the Electronic Speed Control is set, push the SET (-) button. If the button is continually held in the SET (-) position, the set speed will continue to decrease until the button is released. Release the button when the desired speed is reached, and the new set speed will be established.