2012 Dodge Charger Owner Manual SRT8 - Page 457

WHAT TO DO IN EMERGENCIES 455 If the tire does not inflate to at least 26 psi (1.8 Bar) hose, and place the TIREFIT kit in the vehicle storage location. Quickly proceed to (D) "Drive Vehicle". pressure within 15 minutes: • The tire is too badly damaged. Do not attempt to drive the vehicle further. Call for assistance. NOTE: If the tire becomes over-inflated, press the Deflation Button to reduce the tire pressure to the recommended inflation pressure before continuing. If the tire inflates to the recommended pressure or is at least 26 psi (1.8 Bar) pressure within 15 minutes: 1. Press the Power Button (4) to turn off the TIREFIT kit. CAUTION! • The metal end fitting from Power Plug (8) may get hot after use, so it should be handled carefully. • Failure to reinstall the cap on the fitting at the end of the Sealant Hose (6) can result in sealant contacting your skin, clothing, and the vehicle's interior. It can also result in sealant contacting internal TIREFIT kit components which may cause permanent damage to the kit. 6 2. Remove the Speed Limit sticker from the top of the Sealant Bottle (1) and place the sticker on the instrument (D) Drive Vehicle: panel. Immediately after injecting sealant and inflating the tire, 3. Immediately disconnect the Sealant Hose (6) from the drive the vehicle 5 miles (8 km) or 10 minutes to ensure valve stem, reinstall the cap on the fitting at the end of the distribution of the TIREFIT Sealant within the tire. Do not exceed 55 mph (88 km/h).