2012 Ducati Diavel AMG Owners Manual - Page 107

Clock setting function This function sets the clock. To access the function it is necessary to view the "setting" menu page 48, using button (1, fig. 25) "▲" or (2, fig. 25) "▼" select the "CLOCK" function and press the reset button (12, fig. 23) to confirm. In the following screen the message "SETTING" is highlighted in green (3, fig. 68); now, press the reset button (12, fig. 23) for 3 seconds to edit the time displayed on the dashboard on handlebar and the "SETTING" indication highlighting turns gray (4, fig. 68). Clock setting On entering this mode, the message "AM" will flash; if you press the button (2, fig. 25) "▼" "PM" flashes; if you press the button (2, fig. 25) "▼" you will return to the previous step (if it is 00:00, when switching between "AM" to "PM", 12:00 will be displayed). pressing button (1, fig. 25) "▲" accesses the hour setting mode; the hours start to flash. each time you press the button (2, fig. 25) "▼" the digit will increase by 1 hour; if the button is held pressed down (2, fig. 25) "▼" the digit will increase by 1 hour every second (when the button is held depressed, the hours do not flash). pressing button (1, fig. 25) "▲", gives access to the minute setting mode; minutes start to flash. 106 each time you press the button (2, fig. 25) "▼" the digit will increase by 1 minute; holding down the button (2, fig. 25) "▼" the digit will increase by 1 minute each second; if the button is held down (2, fig. 25) "▼" for more than 5 seconds the steps increase by 1 every 100 m (during prolonged pressing of the button (2, fig. 25) "▼" the seconds will not flash). If you press button (1, fig. 25) "▲" setting is completed and the dashboard on tank display "SETTING" item is again highlighted in green (5, fig. 68). To exit, select "EXIT" and press the reset button (12, fig. 23). Note In case of a battery cutoff, when the voltage is restored and at the next Key-On, the clock is always reset (it starts automatically from 00:00).