2012 Ducati Diavel AMG Owners Manual - Page 121

PIN CODE activation function To access the function it is necessary to view the "setting" menu page 74, using button (1, fig. 25) "▲" or (2, fig. 25) "▼" select the "PIN CODE" function and press the reset button (12, fig. 23) to go to next page. Note If "MODIFY PIN CODE" appears when accessing this function, this means that there is already a stored PIN and therefore the function is already active. When accessing the function, "INSERT NEW PIN CODE" with four dashes "- - - -" in the bottom line will appear on the display highlighted in green; now enter a 4 digit code. Entering the code: press the reset button (12, fig. 23). Each time you press the button (2, fig. 25) "▼" the displayed number increases from "0" to "9" and then returns to "0"; to confirm the number, press the reset button (12, fig. 23). Repeat the procedure until inserting the fourth digit. To highlight the "MEMORY" indication, press the reset button (12, fig. 23) again. 120 To store the entered PIN, press the reset button (12, fig. 23) for 3 seconds with "MEMORY" indication highlighted in green. As a confirmation of PIN storage, the display will show the message "MEMORIZED" for about 2 seconds and then automatically highlight "EXIT" option. From this moment, "MODIFY PIN CODE" will be displayed when accessing the "PIN CODE" function and the PIN can be changed again as many times as necessary (without limits). To exit the setting function, press the reset button (12, fig. 23) when "EXIT" is highlighted.