1998 Ford Crown Victoria Owner's Manual - Page 106
1998 Ford Crown Victoria Manual
Page 106 highlights
Roadside emergencies Connecting the jumper cables 1. Position the vehicles so that they do not touch one another. 1 4 2. Switch off the engine. Switch off any unnecessary electrical + equipment. 3. Connect the positive (+) terminal of the discharged battery (1) to the positive (+) terminal of the booster battery (2). 3 4. Connect one end of the second lead to the negative (-) terminal of 2 the booster battery (3) and the other end to a metal part of the engine to be started (4), not to the negative (-) terminal of the discharged battery. 5. Make sure that the jump leads are clear of moving parts of the engine. - Do not connect the end of the second cable to the negative (-) terminal of the battery to be jumped. A spark may cause an explosion of the gases that surround the battery. Jump starting 1. Start the booster vehicle and run the engine at moderately increased speed. 2. Start the engine of the vehicle with the discharged battery. 3. Once the engine has been started, run both engines for a further three minutes before disconnecting the leads. 106 - +