1998 Ford Crown Victoria Owner's Manual - Page 138
1998 Ford Crown Victoria Manual
Page 138 highlights
Maintenance and care Replacing front parking lamp/turn signal bulbs 1. Make sure headlamp switch is in OFF position, then open the hood. 2. Remove the protective cover by turning the three knobs to the unlock position. 3. Disengage the safety snap on the connector by pulling upward slightly on the clip. 4. Disconnect the electrical connector from the bulb socket. 5. Rotate the bulb socket counterclockwise about ¼ turn and remove from lamp assembly. 6. Carefully pull bulb straight out of the socket and push in the new bulb. 7. To complete installation, follow the removal procedure in reverse order. Replacing tail lamp/backup bulbs For bulb replacement, see a dealer or qualified technician. High-mount brakelamp bulbs For bulb replacement, see a dealer or qualified technician. Replacing sidemarker and cornering lamp bulbs For bulb replacement, see a dealer or qualified technician. Replacing license plate lamp bulbs For bulb replacement, see a dealer or qualified technician. AIMING THE HEADLAMPS The alignment of your headlamps should be checked by a qualified service technician if: • Oncoming motorists frequently signal you to deactivate your high beams, and your high beams are not activated. 138