1998 Ford Crown Victoria Owner's Manual - Page 54
1998 Ford Crown Victoria Manual
Page 54 highlights
Controls and features Theft indicator The theft indicator on top of the instrument panel will operate as follows: • When the ignition is OFF, the theft indicator will flash briefly every 2 seconds to indicate the SecuriLock system is protecting your vehicle. • When the ignition is turned to RUN or START, the theft indicator will light for 3 seconds and then go out. If the theft indicator stays on for an extended period of time or flashes rapidly, have the system serviced by your dealership or a qualified technician. Programming spare SecuriLock keys Spare SecuriLock keys can be purchased from your dealership and programmed to your SecuriLock anti-theft system (up to a total of 8 keys). Your dealership can program your new SecuriLock key(s) to your vehicle or you can do it yourself using the following simple procedure. To program a new SecuriLock key yourself, you will need two previously programmed SecuriLock keys (keys that already operate your vehicle's engine). If two previously programmed SecuriLock keys are not available (one or both of your original keys were lost or stolen), you must bring your vehicle to your dealership to have the spare SecuriLock key(s) programmed. Procedure to program spare SecuriLock keys to your vehicle New SecuriLock keys must have the correct mechanical key cut for your vehicle. Conventional (non-SecuriLock ) keys cannot be programmed to your vehicle. You will need to have two previously programmed SecuriLock keys and the new unprogrammed SecuriLock key readily accessible for timely implementation of each step in the procedure. Please read and understand the entire procedure before you begin. 1. Insert the first previously programmed SecuriLock key into the ignition and turn the ignition from OFF to RUN (maintain ignition in RUN for at least one second). 2. Turn ignition to OFF and remove the first SecuriLock key from the ignition. 54