2011 Ford Taurus Owner Guide 3rd Printing - Page 111

Locks and Security 5. Press SETUP to enter your choice. The next optional setting will be displayed. 6. Repeat Steps 4 and 5 until you are done changing the optional settings. Clear MyKey௡ To reset all MyKeys௡ as admin keys, do the following: 1. Turn the vehicle on using the admin key. 2. Press SETUP until PRESS RESET TO CLEAR MYKEY is displayed. 3. Press and release the RESET button. HOLD RESET TO CONFIRM CLEAR is displayed. 4. Press and hold the RESET button for two seconds until ALL MYKEYS CLEARED is displayed. Check MyKey௡ system status The vehicle system check will provide the status of the following MyKey௡ parameters: • MYKEY MILES - This odometer only tracks mileage when a MyKey௡ is used. If mileage does not accumulate as expected, then the MyKey௡ is not being used by the intended user. The only way to reset this odometer to zero is by clearing MyKey௡. If this odometer is lower than the last time you checked, then the MyKey௡ system has been recently cleared. • # MYKEY(S) PROGRAMMED - Indicates how many MyKeys௡ are programmed to the vehicle. Can be used to detect deletion of a MyKey௡. • # ADMIN KEYS PROGRAMMED - Indicates how many admin keys are programmed to the vehicle. Can be used to detect if an additional spare key has been programmed to the vehicle. Refer to Message center in the Instrument Cluster chapter for MyKey௡ system warnings displays. Using MyKey௡ with remote start systems MyKey௡ is not compatible with non-Ford approved aftermarket remote start systems. If you choose to install a remote start system please see your authorized dealer for a Ford approved remote start system. 111 2011 Taurus Owners Guide, 3rd Printing USA (fus)