2011 Ford Taurus Owner Guide 3rd Printing - Page 22

Instrument Cluster To reset the oil monitoring system to 100% after each oil change, perform the following: 1. Press and release SETUP to display "OIL LIFE XXX% HOLD RESET = NEW". 2. Press and hold RESET for two seconds and release to reset the oil life to 100%. UNITS Displays the current units in English or Metric. Press RESET to change between English and Metric. AUTO HIGH BEAM (if equipped) This feature automatically turns on your high beams if it is dark enough and no other traffic is present. Press RESET to turn the auto high beam on or off. AUTOLAMP (SEC) This feature keeps your headlights on for up to three minutes after the ignition is switched off. Press RESET to select the new Autolamp delay values of 0, 10, 20, 30, 60, 90, 120 or 180 seconds. AUTOLOCK This feature automatically locks all vehicle doors when the vehicle is shifted into any gear, putting the vehicle in motion. Press RESET to turn autolock on or off. AUTOUNLOCK This feature automatically unlocks all vehicle doors when the driver's door is opened within 10 minutes of the ignition being turned off. Press RESET to turn autounlock on or off. COLLISION WARN GAP (if equipped) This allows you to adjust the sensitivity setting of the collision warning system. See Collision Warning System in the Driving chapter for more information. Press RESET to change the sensitivity setting from high sensitivity to low sensitivity . COLLISION WARN CHIME (if equipped) This feature warns the driver of a possible collision. See Collision warning system in the Driving chapter for more information. 22 2011 Taurus Owners Guide, 3rd Printing USA (fus)