2014 Ford F250 Super Duty Super Cab Owner Manual Printing 2 - Page 115

Seats This feature will automatically recall the position of the driver's seat, power mirrors, and adjustable pedals. The memory control is located on the driver's door. You can recall the memory positions when you press your remote entry transmitter unlock control (if the transmitter is programmed to a memory position) or, when you enter a valid personal entry code that is programmed to a memory position. The mirrors will move to the programmed position and the seat will move to the easy entry position. The seat will move to the final position when the key is in the ignition (if easy entry feature is enabled). 1 2 E162734 Easy Entry and Exit Feature (If Equipped) To program position 1: 1. Move the memory features to the desired positions using the associated controls. 2. Press and hold button 1 for at least two seconds. A chime will sound confirming that a memory position has been set. To program position 2, repeat the previous procedure using button 2. You can program the memory feature to a remote entry transmitter. See Keys and Remote Controls (page 46). You can recall a programmed memory position: • • in any gearshift position if the ignition is not on. only in position P or N if the ignition is on. If you enable the easy entry and exit feature, it automatically moves the driver's seat rearward 2 inches (5 centimeters) when the transmission selector lever is in position P and the key is removed from the ignition. If the seat is located less than 2 inches (5 centimeters) from the rear of the seat track, the seat travel will be less than 2 inches (5 centimeters) rearward. The driver's seat will return to the previous position when the key is put in the ignition. You can enable or disable this feature through the information display. See Information Displays (page 81). REAR SEATS (IF EQUIPPED) Folding Up the Rear Seats (SuperCab) 112 Super Duty (TFA)