2014 Ford F250 Super Duty Super Cab Owner Manual Printing 2 - Page 248

Maintenance CHANGING THE ENGINE AIR FILTER WARNING To reduce the risk of vehicle damage and personal burn injuries, do not start your engine with the air cleaner removed and do not remove it while the engine is running. Note: Failure to use the correct air filter element may result in severe engine damage. The customer warranty may be void for any damage to the engine if the correct air filter element is not used. When changing the air filter element, use only the air filter element listed. See Capacities and Specifications (page 292). Change the air filter element at the proper interval. See Scheduled Maintenance (page 430). E163756 2. Reposition the locking clip on the connector (connector shown from below for clarity), squeeze the connector and pull it off of the air outlet tube. E163757 E163755 1. Locate the mass air flow sensor electrical connector on the air outlet tube. Disconnect the MAF sensor electrical connector. 3. Clean the area around the air tube to air cover connection to prevent debris from entering the system and then loosen the bolt on the air tube clamp so the clamp is no longer snug to the air tube. It is not necessary to completely remove the clamp. 4. Pull the air tube off from the air cleaner housing. 245 Super Duty (TFA)