2014 Ford F250 Super Duty Super Cab Owner Manual Printing 2 - Page 237

Maintenance TRANSFER CASE FLUID CHECK BRAKE FLUID CHECK Fluid levels between the MIN and MAX lines are within the normal operating range; there is no need to add fluid. If the fluid levels are outside of the normal operating range, the performance of the system could be compromised; seek service from your authorized dealer immediately. POWER STEERING FLUID CHECK Check the power steering fluid. Refer to See Scheduled Maintenance (page 430). . If adding fluid is necessary, use only MERCON LV ATF Note: This procedure is for vehicles with gasoline engines. Vehicles with diesel engines are similar. Refer to Under Hood Overview in your diesel supplement. Check the fluid level when it is at ambient temperature. 1. E164246 1. Clean the filler plug. 2. Remove the filler plug and inspect the fluid level. 3. Add only enough fluid through the filler opening so that the fluid level is at the bottom of the opening. Use only fluid that meets Ford specifications. Refer to the See Capacities and Specifications (page 292). section. 2. 3. 4. 5. Check the fluid level in the reservoir. It should be between the MIN and MAX range. Do not add fluid if the level is within this range. If the fluid level is low. Add fluid to bring fluid level up to be between the MIN and MAX range. Start the engine. While the engine idles, turn the steering wheel left and right several times. Turn the engine off. 234 Super Duty (TFA)