2004 Honda S2000 Owner's Manual - Page 45

Instrument Panel Indicators Turn Signal and Hazard Warning Indicators The left or right turn signal indicator blinks when you signal a lane change or turn. If the indicators do not blink or blink rapidly, it usually means one of the turn signal bulbs is burned out (see page 139). Replace the bulb as soon as possible, since other drivers cannot see that you are signaling. When you turn on the Hazard Warning switch, both turn signal indicators blink. All turn signals on the outside of the vehicle should flash. High Beam Indicator This indicator comes on with the high beam headlights. See page 48 for information on the headlight controls. ''Daytime Running Lights'' Indicator Canadian models only This indicator comes on when you turn the ignition switch to ON (II) with the headlight switch off and the parking brake set. It should go off if you turn on the headlights or release the parking brake. If it comes on at any other time, it means there is a problem with the DRL. There may also be a problem with the high beam headlights. Immobilizer System Indicator This indicator comes on for a few seconds when you turn the ignition switch to ON (II). It will go off if you have inserted a properly-coded ignition key. If it is not a properlycoded key, the indicator will blink and the engine will not start (see page 52 ). This indicator also blinks several times when you turn the ignition switch from ON (II) to ACCESSORY (I) or LOCK (0). Cruise Control Indicator This indicator comes on when you set the cruise control. See page 95 for information on operating the cruise control. Low Fuel Indicator This indicator comes on as a reminder that you must refuel soon. 42 Instruments and Controls