2007 Honda Odyssey Owner's Manual - Page 192

Driving Position Memory System Doing any of the following after pressing the MEMO button will cancel the storing procedure. Not pressing a memory button within 5 seconds. Pressing the MEMO button again within 5 seconds. Readjusting the seat position. Each memory button stores only one seat position. Storing a new position erases the previous position stored in that button's memory. If you want to add a new position while retaining the current one, use the other memory button. All stored driving positions will be lost if your vehicle's battery goes dead or is disconnected. MEMORY BUTTONS Selecting a Memorized Position The system will move the driver's seat to the memorized position. The indicator in the selected memory button will flash during movement. When the adjustment is complete, you will hear two beeps, and the indicator will stay on. To stop the system's automatic adjustment, do any of these actions: Press any button on the driver's door: MEMO, memory button 1 or 2. Push any of the adjustment switches for the seat. Shift out of Park. If desired, you can use the adjustment switches to change the seat position after it is in its memorized position. If you change the memorized position, the indicator in the memory button will go out. To keep this seat position for later use, you must store it in the driver's seat position memory. To select a memorized position, do this: 1. Make sure the shift lever is in Park. Press on the brake pedal. 2. Press the desired memory button (1 or 2) until you hear a beep. 186