2007 Honda Odyssey Owner's Manual - Page 223

Vents, Heating, and A/C On EX and EX-L models You can change the fan speed of the rear system from the front control panel. Press the REAR button, the indicator in the button comes on. Push the rear fan control button up or down to increase or decrease the rear fan speed. When you press the REAR LOCK button, the indicator in the button comes on, and the rear passenger control panel is disabled. See page 222 for how to operate the rear passenger control panel. Ventilation The flow-through ventilation system draws in outside air, circulates it through the interior, then exhausts it through vents near the rear side panels. 1. Set the temperature control dial or button to the lower limit. 2. Make sure the A/C is off. and fresh air mode. 3. Select 4. Set the fan to the desired speed. Using the Heater The heater uses engine coolant to warm the air. If the engine is cold, it will be several minutes before you feel warm air coming from the system. and fresh air mode. 1. Select 2. Set the fan to the desired speed. 3. Adjust the warmth of the air with the temperature control dial or buttons. Using the A/C Air conditioning places an extra load on the engine. Watch the engine coolant temperature gauge (see page 77 ). If it moves near the red mark, turn off the A/C until the gauge reads normally. Features 1. Press the A/C button. The indicator in the button comes on (LX model) or ''A/C ON'' is shown in the display (EX, EX-L and Touring models) when a fan speed is selected. 2. Make sure the temperature is set to the lower limit. 3. Select . 4. If the outside air is humid, select recirculation mode. If the outside air is dry, select fresh air mode. 5. Set the fan to the desired speed. CONTINUED 217