2006 Infiniti Q45 Owner's Manual - Page 105
2006 Infiniti Q45 Manual
Page 105 highlights
SUNROOF WARNING In an accident you could be thrown from the vehicle through an open sunroof. Always use seat belts and child restraints. Do not allow anyone to stand up or extend any portion of their body out of the sunroof opening while the vehicle is in motion or while the sunroof is closing. push the up switch. E or down F side of the tilt AUTO REVERSE FUNCTION (WHEN CLOSING THE SUNROOF) If the control unit detects something caught in the sunroof as it is closing, the sunroof will immediately open backward. The auto reverse function can be activated when the sunroof is closed by automatic operation when the ignition key is in the ON position or for 45 seconds after the ignition key is turned to the ACC or OFF position. Depending on the environment or driving conditions, the auto reverse function may be activated if an impact or load similar to something being caught in the sunroof occurs. CAUTION Remove water drops, snow, ice or sand from the sunroof before opening. Do not place any heavy object on the sunroof or surrounding area. The sunroof operates when the ignition key is in the ON position or for about 45 seconds after the ignition key is turned to the ACC or OFF position. If the driver's, or passenger's door is opened during this period of about 45 seconds, power to the sunroof is canceled. SIC3055 SLIDING THE SUNROOF To open the roof, push and hold the switch to the open side A . To close the roof, push and hold the switch to the closed side B . TILTING THE SUNROOF To tilt up, first close the sunroof, then push and hold the up side of the tilt switch E . To tilt down the sunroof, push and hold the down side F . Automatic operation To fully open or close the sunroof, completely push the switch to the open side C or close side D ; it need not be held. The sunroof will automatically open or close all the way. To stop the sunroof, just push the switch toward the close or open side, or SUN SHADE Open/close the sun shade by sliding it backward/forward. Instruments and controls 2-43