2006 Infiniti Q45 Owner's Manual - Page 134

AUTOMATIC DRIVE POSITIONER 3. The selector lever is moved to R (Reverse). After the shift lever is moved to R (Reverse), the mirror surface selected in step 2 will turn downward. The selected mirror surface will return to its original position when any of the following have occurred: The selector lever is moved to any position other than R (Reverse). The outside mirror control switch is set to the center position. The ignition switch is turned OFF. For more information regarding this feature and how to save the R (Reverse) mirror tiltdown adjustment in the "Automatic drive positioner" memory, refer to "Automatic drive positioner" later in this section. The automatic drive positioner system has two features: Entry/exit function Memory storage When the driver's door is closed with the key in the LOCK position. When the key is turned from ACC to ON with the driver's door open. The entry/exit function can be activated or canceled. See "Vehicle electronic systems" in the "4. Monitor, climate, audio and voice-activated control systems" section. ENTRY/EXIT FUNCTION This system is designed so that the driver's seat, steering column and outside mirror will automatically move when the automatic transmission selector lever is in the P (Park) position. This allows the driver to get into and out of the driver's seat more easily. The driver's seat will slide backward and the steering wheel will move up: When the key is removed from the ignition switch. When the driver's door is opened with the key in the LOCK position. When the key is turned to the LOCK position with the driver's door open. The driver's seat and steering wheel will return to the previous position: When the key is inserted into the ignition switch. Initializing entry/exit function If the battery cable is disconnected, or if the fuse opens, the entry/exit function will not work though this function was set on before. In such a case, after connecting the battery or replacing with a new fuse, open and close the driver's door more than two times after inserting the electronic key into the ignition switch. The entry/exit function will be activated. 3-20 Pre-driving checks and adjustments