2006 Infiniti Q45 Owner's Manual - Page 79
2006 Infiniti Q45 Manual
Page 79 highlights
Sport mode indicator light (if so equipped) This light comes on when the active damper suspension mode select switch is set to the SPORT position. curs in the system, the VDC system function will be canceled but the vehicle is still driveable. For additional information, see "Vehicle dynamic control (VDC) system" in the "5. Starting and driving" section of this manual. Have the brakes checked as soon as possible if the warning sound is heard. Lane Departure Warning (LDW) chime (if so equipped) If the vehicle is traveling close to either the left or the right of a traveling lane with detectable lane markers, the LDW system will blink the LDW indicator light and sound a chime. Turn signal/hazard indicator lights The light flashes when the turn signal switch lever or hazard switch is turned on. AUDIBLE REMINDERS Key reminder chime A chime will sound if the driver side door is opened while the key is left in the ignition switch (ignition switch is turned to the ACC, OFF or LOCK position). Remove the key and take it with you when leaving the vehicle. Vehicle dynamic control off indicator light The light comes on when the vehicle dynamic control (VDC) off switch is pushed to OFF. This indicates that the VDC system is not operating. This light also comes on when the ignition switch is turned to the ON position. The light will turn off if the VDC system is operational. When the VDC off indicator light and slip indicator light come on with the VDC system turned on, this light alerts the driver to the fact that the VDC system fail-safe mode is operating and the system may not be functioning properly. Have the system checked by an INFINITI dealer. If a malfunction oc- Light reminder chime A chime will sound when the driver side door is opened with the light switch in the or position (ignition switch is turned to the ACC, OFF or LOCK position). Turn the light switch off when you leave the vehicle. Brake pad wear warning The disc brake pads have audible wear warnings. When a brake pad requires replacement, it will make a high pitched scraping sound when the vehicle is in motion whether or not the brake pedal is depressed. Instruments and controls 2-17