2008 Infiniti G37 Owner's Manual - Page 110

Instrument brightness control The instrument brightness control switch can be operated when the ignition switch is in the ON position. When the switch is operated, the dot matrix liquid crystal display switches to the brightness adjustment mode. Push the upper switch A to brighten the instrument panel lights. The bar 1 moves to the + side. When reaching the maximum brightness, "MAX" appears on the display 2 . Push the lower switch B to dim the instrument panel lights. The bar 1 moves to the side. When reaching the minimum brightness, "MIN" appears on the display 3 . However, "MIN" does not appear during the nighttime. The dot matrix liquid crystal display returns to the normal display under the following conditions: ● when the instrument brightness control switch is not operated for more than 5 seconds. ● when the side or front of the switch or SIC3271 TURN SIGNAL SWITCH 1 Turn signal Move the lever up or down to signal the turning direction. When the turn is completed, the turn signals cancel automatically. 2 Lane change signal To indicate a lane change, move the lever up or down to the point where lights begin flashing. switch on the right side of the combination meter panel is pushed. SIC3270 2-36 Instruments and controls