2008 Infiniti G37 Owner's Manual - Page 95

INDICATORS FOR OPERATION 1. Engine start operation indicator (Automatic Transmission models) This indicator appears when the selector lever is in the P (Park) position. This indicator means that the engine will start by pushing the ignition switch with the brake pedal depressed. 4. Intelligent Key removal indicator This indicator appears when the driver's door is opened with the ignition switch in the OFF or LOCK position and the Intelligent Key placed in the Intelligent Key port. A key reminder chime also sounds. If this indicator appears, remove the Intelligent Key from the Intelligent Key port and take it with you when leaving the vehicle. See "INTELLIGENT KEY SYSTEM" in the "3. Predriving checks and adjustments" section for more details. 6. SHIFT "P" warning (Automatic Transmission models) This warning appears when the ignition switch is pushed to stop the engine with the selector lever in any position except the P (Park) position. If this warning appears, move the selector lever to the P (Park) position or push the ignition switch to the ON position. An inside warning chime will also sound. (See "INTELLIGENT KEY SYSTEM" in the "3. Predriving checks and adjustments" section.) 2. Steering lock release malfunction indicator This indicator appears when the steering wheel cannot be released from the LOCK position. If this indicator appears, push the push-button ignition switch while lightly turning the steering wheel right and left. 5. NO KEY warning This warning appears in either of the following conditions. No key inside the vehicle The warning appears when the door is closed with the Intelligent Key left outside the vehicle and the ignition switch in the ACC or ON position. Make sure that the Intelligent Key is inside the vehicle. Unregistered Intelligent Key The warning appears when the ignition switch is pushed from the LOCK position and the Intelligent Key cannot be recognized by the system. You cannot start the engine with an unregistered key. Use the registered Intelligent Key. 7. "PUSH" warning (Automatic Transmission models) This warning appears when the selector lever is moved to the P (Park) position with the ignition switch in the ACC position after the SHIFT "P" warning appears. To push the ignition switch to the OFF position, perform the following procedure: SHIFT "P" warning → (Move the selector lever to "P") → PUSH warning → (Push the ignition switch → ignition switch position is turned to 3. Intelligent Key insertion indicator This indicator appears when the Intelligent Key needs to be inserted into the Intelligent Key port. (For example, the Intelligent Key battery is discharged.) If this indicator appears, insert the Intelligent Key into the Intelligent Key port in the correct direction. (See "PUSH-BUTTON IGNITION SWITCH" in the "5. Starting and driving" section.) Instruments and controls 2-21