2004 Jeep Wrangler Owner's Manual - Page 195

STARTING AND OPERATING 195 WARNING! • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change suspension dimensions and performance characteristics, resulting in changes to steering, handling, and braking of your vehicle. This can cause unpredictable handling and stress to steering and suspension components. You could lose control and have an accident resulting in serious injury or death. Use only the tire and wheel sizes with load ratings approved for your vehicle. • Never use a tire smaller than the minimum tire size listed on your vehicle's tire label. Using a smaller tire could result in tire overloading and failure. You could lose control and have an accident. CAUTION! Replacing original tires with tires of a different size may result in false speedometer and odometer readings. Check with your dealer before replacing tires with a different size. Alignment And Balance Tire suspension components of your vehicle should be inspected and aligned when needed, to obtain maximum tire tread life. Poor suspension alignment may result in: • reduced tread life; • uneven tire wear, such as feathering and one-sided wear, • vehicle pull to the right or to the left. Tires may also cause your vehicle to pull to the left or right. Alignment won't correct this condition. See your dealer for proper diagnosis. 5 • Failure to equip your vehicle with tires having adequate speed capability can result in sudden tire failure and loss of vehicle control. • Overloading your tires is dangerous. Overloading can cause tire failure. Use tires of the recommended load capacity for your vehicle - never overload them.