2004 Jeep Wrangler Owner's Manual - Page 68

68 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 5. Unzip the zipper on the sport bar cover to expose the pivot bracket. Remove the brackets using a #T40 Torx head driver. Recover and re-zip the sports bar cover. Store pivot brackets and screws in a safe place. 1. Locate and remove the following items prior to hard top removal: • right and left door frames • door frame attachment knobs (4) • right and left quarter windows • rear tailgate window. 2. Remove the hard top. Refer to "Hard Top Removal" in this section. 3. Install the door frames. Refer to "Door Frame" in this section. 4. If the soft top has been removed, follow these steps to reinstall the soft top. If the soft top is on the vehicle, proceed to step #4. a. If the pivot brackets have been removed, unzip the sport bar cover and attach the pivot brackets and screws with a #T40 Torx head driver. Re-cover and re-zip sport bar cover. b. If the door frames have been removed, re-install them (refer to "Door Frame" in this section). 6. Reinstall the hard top. Refer to "Hard Top Installation" in this section. Installing the Soft Top NOTE: The following procedures are for first time set up only. For future soft top procedures, refer to "Soft Top" in this section.