2007 Jeep Liberty Owner's Manual - Page 118

118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Instrument Panel and Interior Lights When the multi-function control lever is in the parklight, or headlight position, rotating the center portion of the lever up and down will increase and decrease the brightness (dimmer control) of the instrument panel lights. Full daytime brightness on all electronic displays (odometer, overhead console, radio, and climate control) is obtained by rotating the center portion of the control to the first detent above the dimmer range. Rotating the control to the second detent above the dimmer range turns the interior lights on. Rotating the control to the "Off" (extreme bottom) position disables all the interior lights, even when the doors and liftgate are open. While in the "Off" position the instrument panel lighting is at the lowest light level and may not be suitable for night driving. Daytime Running Lights - If Equipped The high beam headlights come on at a low intensity level after the engine has started. The lights remain on until the ignition switch is turned OFF or the parking brake is engaged. The headlight switch must be used for normal night time driving. Lights-On Reminder A chime will sound if the driver's door is left open, and the headlights or parking lights are left on. Fog Lights - If Equipped The front fog light switch is located in the multifunction control lever. To activate the fog lights, turn on the park or low beam headlights and pull out the end of the lever. The "Fog Light Indicator Light" will illuminate when the fog lights are on. NOTE: The fog lights will only operate with the park lights or the headlights on low beam. Selecting high beam headlights will turn off the fog lights.