2007 Jeep Liberty Owner's Manual - Page 25
2007 Jeep Liberty Manual
Page 25 highlights
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 2. Enter Program Mode: Turn the ignition to the ON position, and using a currently programmed transmitter; press and hold the Unlock button on the transmitter. Continue to hold the "Unlock" button, wait at least 4 but no longer than 10 seconds, then press and hold the PANIC button for at least 1 second. Release both buttons simultaneously. 3. Program Each Transmitter: All transmitters to be used with your vehicle must be programmed as follows: Press and release the Lock and Unlock buttons simultaneously, followed by a press and release of ANY button on each transmitter to be programmed. You will hear a chime when a transmitter has been successfully programmed. General Information This transmitter complies with FCC rules part 15 and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference that may be received, including interference that may cause undesired operation. If your Remote Keyless Entry fails to operate from a normal distance, check for these two conditions: 1. Weak batteries in transmitter. The expected life of batteries is from one to two years 2. Closeness to a radio transmitter such as a radio station tower, airport transmitter, and some mobile or CB radios. 2