2007 Jeep Liberty Owner's Manual - Page 146

146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 4. Press and hold the just-trained HomeLink button. TRANSMIT should appear on the display. If your device activates when the HomeLink button is depressed and released, programming is complete. NOTE: To program the remaining two HomeLink buttons, simply repeat the Programming HomeLink process. If the message TRANSMIT appears on the HomeLink display but your device does not activate, the device may be equipped with a rolling code system. Continue with steps five through seven below to complete the programming of a rolling code equipped device (most commonly a garage door opener). 5. At the garage door opener receiver (motor-head unit) in the garage, locate the learn or smart button. This can usually be found where the hanging antenna wire is attached to the motor-head unit. 6. Firmly press and release the learn or smart button. (The name and color of the button may vary by manufacturer.) NOTE: There are 30 seconds in which to initiate the next step. 7. Return to the vehicle and firmly press, hold for two seconds and release the programmed HomeLink button. Repeat the press/hold/release sequence a second time, and, depending on the brand of the garage door opener (or other rolling code equipped device), repeat this sequence a third time to complete the programming process. HomeLink should now activate your rolling code equipped device. NOTE: To program the remaining two HomeLink buttons, simply repeat the Programming Homelink process.