2007 Jeep Liberty Owner's Manual - Page 22

22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE remain on for about 30 seconds, when you unlock the doors. The park lights will flash twice to acknowledge the unlock signal. NOTE: The transmitter can be programmed to unlock all the doors upon the first press of the Unlock button (within 23-50 feet (7-15 meters) of the vehicle) by performing the following procedure: 1. Press and hold the Unlock button on the transmitter. 2. Continue to hold the Unlock button, wait at least 4 but no longer than 10 seconds, then press the "Lock" button. 3. Release both buttons. 4. Repeating steps 1-3 will restore original operation. NOTE: The Light Flash can be enabled or disabled (within 23-50 feet (7-15 meters) of the vehicle) by performing the following procedure: 1. Press and hold the Lock button on the transmitter. 2. Continue to hold the Lock button, wait at least 4 but no longer than 10 seconds, then press the "Unlock" button. 3. Release both buttons. 4. Repeating steps 1-3 will restore original transmitter operation. To Lock the Doors Press and release the "Lock" button once to lock the doors, swing gate flip-up window, and swing gate. The horn will chirp and the park lights will flash once to acknowledge the lock signal. NOTE: The horn chirp can be enabled or disabled (within 23-50 feet (7-15 meters) of the vehicle) by the following procedure: 1. Press and hold the Lock button on the transmitter.