2008 Kawasaki JET SKI STX-15F Owners Manual - Page 109

STORAGE 107 less) about once a month. Keep the battery well charged especially during cold weather. Engine Mount Bracket Bolts: Tighten all engine mount bracket bolts. • Tightening Torque 29 N·m (3.0 kgf·m, 22 ft·lb) j NOTE żWe recommend that you have this service done A. Air Filter Case by your authorized dealer since it requires special tools. Jet Pump Bearings/Seals: Battery: Remove the battery (see the battery section in the MAINTENANCE AND ADJUSTMENTS chapter). Clean the exterior with a solution of baking soda and water (one heaping tablespoon of baking soda in one cup of water). Rinse thoroughly with water. • • CAUTION The jet pump bearings and seals should be serviced prior to prolonged storage to prevent any water that may be left in the pump from corroding the bearings and causing premature failure. Major engine damage can occur if the jet pump bearings fail due to lack of maintenance. Have your Kawasaki dealer service the jet pump bearings and seals before any prolonged storage to remove any water that may be left in the pump. Prolonged exposure to stagnant water will cause the bearings to corrode and fail prematurely. Major engine damage can occur if the jet pump bearings fail due to lack of maintenance. CAUTION Never remove the sealed cap, or the battery can be damaged. both battery terminals with grease. • Coat Store battery in a cool, dry place. Do not ex• pose itthe to freezing temperatures. During storage it should be given a slow charge (one ampere or