2009 Kawasaki MULE 4010 Trans4x4 Owners Manual - Page 86
2009 Kawasaki MULE 4010 Trans4x4 Manual
Page 86 highlights
MAINTENANCE AND ADJUSTMENT 85 Engine Oil In order for the engine to function properly, maintain the engine oil at the proper level, and change the oil and oil filter in accordance with the Periodic Maintenance Chart. Not only do dirt and metal particles collect in the oil, but the oil itself loses its lubricative quality if used too long. up the dipstick out of the dipstick tube, wipe it • Pull dry, and insert it into the tube securely. żIt is necessary to insert the dipstick with its groove NOTE mark facing upwards to measure the correct amount of oil. j WARNING Vehicle operation with insufficient, deteriorated, or contaminated engine oil will cause accelerated wear and may result in engine seizure, accident, and injury. Oil Level Inspection the oil has just been changed, start the engine • If and run it for several minutes at idle speed. This fills the oil filter with oil. Stop the engine, then wait several minutes until the oil settles. A. Dipstick B. Groove Mark C. Rear Seat CAUTION Racing the engine before the oil reaches every part can cause engine damage. the vehicle has just been used, wait several min• If utes for all the oil to drain down. • Park the vehicle on level ground. żIf the vehicle is in 2-person mode, first raise the NOTE cargo bed, support with the rod and pull the stored rear seat and place it onto the engine.
![](/manual_guide/autos/2009-kawasaki-mule-4010-trans4x4-owners-manual-9ef1e52/86.png)