2015 Kawasaki KLX110 Owners Manual - Page 26
2015 Kawasaki KLX110 Manual
Page 26 highlights
GENERAL INFORMATION 25 j Throttle Limiting Screw A screw-type throttle limiting screw can be equipped to this motorcycle to decrease the maximum engine power for a novice rider. The limiting screws function by restricting the turning degree of the throttle grip so that it opens to either 3/8 or 1/2 of full throttle. Kawasaki recommends raising the level of the throttle limiting screw step-by-step as follows; The 3/8 degree screw can be used for the beginning rider, 1/2 degree screw for the semi-skilled rider, and no throttle limiting screw for riders with more advanced skills. ○Changing the position of the throttle limiting screw should only be done at the parents' discretion. longer screw is the 3/8 degree limiter, the • The short screw is the 1/2 degree limiter. NOTE A. 3/8 Degree Screw 47 mm (1.9 in.) B. 1/2 Degree Screw 42 mm (1.7 in.) that the throttle grip has 2 ~ 3 mm (0.08 ~ • Check 0.12 in.) of play and turns smoothly. the blank screw and locknut installed to • Remove the housing. the locknut of the blank screw to the throttle • Install limiting screw. the throttle limiting screw fully into the throt• Screw tle housing and tighten the locknut.