2015 Kawasaki Z1000 ABS Owners Manual - Page 113
2015 Kawasaki Z1000 ABS Manual
Page 113 highlights
112 MAINTENANCE AND ADJUSTMENT the locknuts at the upper • Loosen ends of the throttle cables, and screw both throttle cable adjusters completely so as to give the throttle grip plenty of play. Turn out the decelerator cable adjuster until there is no play when the throttle grip is completely closed. Tighten the locknut. • A. Boots B. Decelerator Cable C. Accelerator Cable D. Adjusters E. Locknuts out the accelerator cable ad• Turn juster until 2 ∼ 3 mm (0.08 ∼ 0.12 • in.) of throttle grip play is obtained. Tighten the locknut. If the throttle cables cannot be adjusted with the adjuster at the upper end of the throttle cable, further adjustment of the throttle cables should
112
MAINTENANCE AND ADJUSTMENT
•
Loosen the locknuts at the upper
ends
of
the
throttle
cables,
and
screw both throttle cable adjusters
completely so as to give the throttle
grip plenty of play.
•
Turn out the decelerator cable ad-
juster until there is no play when the
throttle grip is completely closed.
Tighten the locknut.
A. Boots
B. Decelerator Cable
C. Accelerator Cable
D. Adjusters
E. Locknuts
•
Turn out the accelerator cable ad-
juster until 2
∼
3 mm (0.08
∼
0.12
in.) of throttle grip play is obtained.
Tighten the locknut.
•
If the throttle cables cannot be ad-
justed with the adjuster at the upper
end of the throttle cable, further ad-
justment of the throttle cables should