2015 Kawasaki Z1000 ABS Owners Manual - Page 139

2015 Kawasaki Z1000 ABS Manual

Page 139 highlights

138 MAINTENANCE AND ADJUSTMENT the (+) cable to the (+) ter• Connect minal, and then connect the (-) cable to the (-) terminal. WARNING The cooling fins at the rear of headlight become very hot during normal operation and can cause serious burns. To prevent burns, never touch the cooling fins at the rear of headlight while the engine is running or shortly after it has been stopped. Horizontal Adjustment NOTICE Installing the (-) cable to the (+) terminal of the battery or the (+) cable to the (-) terminal of the battery can seriously damage the electrical system. a light coat of grease on the ter• Put minals to prevent corrosion. the (+) terminal with the red • Cover cap. • Install the removed parts. The headlight beam is adjustable horizontally. If not properly adjusted horizontally, the beam will point to one side rather than straight ahead. Turn the horizontal adjuster in or out until the beam points straight ahead. • Headlight Headlight aiming should be done by an authorized Kawasaki dealer.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167

138
MAINTENANCE AND ADJUSTMENT
Connect the (+) cable to the (+) ter-
minal, and then connect the (–) cable
to the (–) terminal.
NOTICE
Installing the (–) cable to the (+)
terminal of the battery or the (+)
cable to the (–) terminal of the
battery
can
seriously
damage
the electrical system.
Put a light coat of grease on the ter-
minals to prevent corrosion.
Cover the (+) terminal with the red
cap.
Install the removed parts.
Headlight
Headlight aiming should be done by
an authorized Kawasaki dealer.
WARNING
The cooling fins at the rear of
headlight become very hot dur-
ing normal operation and can
cause serious burns. To prevent
burns, never touch the cooling
fins at the rear of headlight while
the engine is running or shortly
after it has been stopped.
Horizontal Adjustment
The headlight beam is adjustable
horizontally.
If not properly adjusted
horizontally, the beam will point to one
side rather than straight ahead.
Turn the horizontal adjuster in or out
until the beam points straight ahead.