2015 Kawasaki Z1000 ABS Owners Manual - Page 140

2015 Kawasaki Z1000 ABS Manual

Page 140 highlights

MAINTENANCE AND ADJUSTMENT 139 nor high beam will illuminate the road far enough ahead. If adjusted too high, the high beam will fail to illuminate the road close ahead, and the low beam will blind oncoming drivers. Turn the vertical adjuster in or out to adjust the headlight vertically. • A. Horizontal Adjusters B. Vertical Adjusters C. Cooling Fins (Heat Sink) Vertical Adjustment The headlight beam is adjustable vertically. If adjusted too low, neither low ○On high beam, the brightest points should be slightly below horizontal. The proper angle is 0.4 degrees below horizontal. This is a 50 mm (2.0 in.) drop at 7.6 m (25 ft) measured from the center of the headlight, with the motorcycle on its wheels and the rider seated. NOTE

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167

MAINTENANCE AND ADJUSTMENT
139
A. Horizontal Adjusters
B. Vertical Adjusters
C. Cooling Fins (Heat Sink)
Vertical Adjustment
The headlight beam is adjustable ver-
tically. If adjusted too low, neither low
nor high beam will illuminate the road
far enough ahead. If adjusted too high,
the high beam will fail to illuminate the
road close ahead, and the low beam
will blind oncoming drivers.
Turn the vertical adjuster in or out to
adjust the headlight vertically.
NOTE
On high beam, the brightest points
should be slightly below horizontal.
The proper angle is 0.4 degrees be-
low horizontal. This is a 50 mm (2.0
in.) drop at 7.6 m (25 ft) measured
from the center of the headlight, with
the motorcycle on its wheels and the
rider seated.