2008 Lincoln Mark LT Owner Guide 3rd Printing - Page 112

Driver Controls 3. Partially lower tailgate and carefully feed tailgate harness up through the truck box and the bumper. Secure the tailgate harness onto the vehicle box. 4. Lower the tailgate. 5. Use a screwdriver to pry the spring clip (on each connector) past the head of the support screw. Disconnect cable. 6. Disconnect the other cable. 7. Lift tailgate to a 45-degree angle from horizontal. 8. Lift right side off of its hinge. 9. Lift tailgate to a 80-degree angle from horizontal. 10. Remove tailgate from left side hinge by sliding tailgate to the right. To install, follow the removal procedures in reverse order. BEDRAILS (IF EQUIPPED) • This bedrail is for appearance use only. To help prevent injury, do not use bedrail to retain cargo. • Retain cargo with the pickup tiedown hooks. BED EXTENDER (IF EQUIPPED) Your vehicle may be equipped with a bed extender designed to extend the pickup box for larger loads. To extend the bed extender: 1. Lower tailgate. 2. Pull the lever on each side of the bed extender to release it from the pickup box. 3. Lift the bed extender over onto the tailgate. 112 2008 Mark LT (mlt) Owners Guide (post-2002-fmt) USA (fus)