2008 Lincoln Mark LT Owner Guide 3rd Printing - Page 173

Seating and Safety Restraints Many tether straps cannot be tightened if the tether strap is hooked to the loop directly behind the child seat. To provide a tight tether strap: 1. Route the tether strap under the head restraint and through the loop directly behind the child seat. 2. Route the tether strap behind the head restraint supports to a loop behind an adjacent seating position, and hook the strap hook onto the loop. If using the driver's side, pass the strap behind the shoulder belt mounting for the center seat. • Always put the tether strap through the routing loop. The head restraint support post will hold the child seat tightly, but the head restraint post is not strong enough to hold the child seat during a collision. 3. Install the child safety seat tightly using the LATCH anchors or safety belts. Follow the instructions in this chapter. 4. Tighten the tether strap according to the child seat manufacturer's instructions. 173 2008 Mark LT (mlt) Owners Guide (post-2002-fmt) USA (fus)