2008 Lincoln Mark LT Owner Guide 3rd Printing - Page 133
2008 Lincoln Mark LT Manual
Page 133 highlights
Locks and Security Please read and understand the entire procedure before you begin. 1. Insert the first previously 3 programmed coded key into the ignition and turn the ignition from 2 the 1 (OFF/LOCK) position to the 3 (ON) position (maintain ignition in 4 the 3 (ON) position for at least one second, but no more than ten seconds). 1 2. Turn ignition from the 3 (ON) position back to the 1 (OFF/LOCK) position in order to remove the first coded key from the ignition. 3. Within ten seconds of removing the first coded key, insert the second previously programmed coded key into the ignition and turn the ignition from the 1 (OFF/LOCK) position to the 3 (ON) position (maintain ignition in the 3 (ON) position for at least one second but no more than ten seconds). 4. Turn the ignition from the 3 (ON) position back to the 1 (OFF/LOCK) position in order to remove the second coded key from the ignition. 5. Within 10 seconds of removing the second coded key, insert the new unprogrammed key (new key/valet key) into the ignition and turn the ignition from the 1 (OFF/LOCK) position to the 3 (ON) position (maintain ignition in the 3 (ON) position for at least one second, but no more than ten seconds). This step will program your new key to a coded key. 6. To program additional new unprogrammed key(s), repeat Steps 1 through 5. If successful, the new coded key(s) will start the vehicle's engine and the theft indicator will illuminate for three seconds and then go out. If not successful, the new coded key(s) will not start the vehicle's engine and the theft indicator will flash on and off and you may repeat Steps 1 through 5. If failure repeats, bring your vehicle to your authorized dealer to have the new spare key(s) programmed. 133 2008 Mark LT (mlt) Owners Guide (post-2002-fmt) USA (fus)
![](/manual_guide/autos/Lincoln-2008-Mark-LT-Owner-Guide-3rd-Printing-e34d89/133.png)