2008 Lincoln Mark LT Owner Guide 3rd Printing - Page 125
2008 Lincoln Mark LT Manual
Page 125 highlights
Locks and Security 5. Turn the ignition to the 1 (OFF/LOCK) position to exit programming. Note: After exiting the driver configuration mode, the horn will chirp once to indicate a feature has been activated/deactivated. Car finder Press twice within three seconds. The horn will chirp and the turn lamps will flash. It is recommended that this method be used to locate your vehicle, rather than using the panic alarm. Sounding a panic alarm Press to activate the alarm. Press again or turn the ignition to 2 (ACCESSORY) or 3 (ON) to deactivate. Note: The panic alarm will only operate when the ignition is in the 1 (OFF/LOCK) position. Memory seat, adjustable pedals, and power mirrors (if equipped) The remote entry system can also control the memory feature. Press the control once to unlock the driver's door. Pressing the control will automatically move the seat, adjustable pedals (if equipped) and power mirrors to the desired memory position (the memory position corresponds to the transmitter being used). Activating the memory feature To activate this feature: 1. Position the seat, adjustable pedals (if equipped), and power mirrors to the positions you desire. 2. Press the SET control on the driver's seat. 3. Within five seconds, press one control on the remote transmitter and then press the 1 or 2 control on the driver's seat to which you would like to associate with Driver 1 or Driver 2 positions. 4. Repeat this procedure for another remote transmitter if desired. Deactivating the memory feature To deactivate this feature: 1. Press the SET control on the driver's door seat. 125 2008 Mark LT (mlt) Owners Guide (post-2002-fmt) USA (fus)