2004 Mercedes ML-Class Owner's Manual - Page 106

Controls in detail Memory function* Storing parking position Stop the vehicle. Switch on ignition (if not already on). Press button 2. The passenger-side exterior rear view mirror is selected. Adjust the exterior rear view mirror with button 3 so that you see the rear wheel and the road curb. Press memory button 2 ( page 105). Within three seconds, press bottom of adjustment button 3. The parking position is stored if the mirror does not move. i If the mirror does move, repeat the above steps. After the setting is stored you can move the mirror again. The selected position will be stored relative to the position button 1 ( page 105) pressed. Storing positions in memory Adjust the seat ( page 37) and exterior rear view mirrors ( page 40) to the desired position. Push memory button 2 ( page 105). Release memory button and press one of the position buttons 1 within three seconds. All the settings are stored at the selected position. Recalling positions from memory ! Do not operate the power seats using the memory button if the seat backrest is in an excessively reclined position. Doing so could cause damage to front or rear seats. Press and hold one of the position buttons 1 until seat and rear view mirrors have fully moved to the stored positions. i Releasing the button immediately stops movement to the stored positions. 106