2004 Mercedes ML-Class Owner's Manual - Page 145

Controls in detail Power windows Opening the windows Press switch 1 to 4 at the symbol k to the resistance point. The corresponding window will move downwards until you release the switch. Closing the windows Press switch 1 to 4 at the symbol j to the resistance point. The corresponding window will move upwards until you release the switch. Warning Fully closing the windows (Express-close) Press switch 1 to 4 at symbol j past the resistance point and release. The corresponding window closes completely. Fully opening the windows (Express-open) Press switch 1 to 4 at the symbol k past the resistance point and release. The corresponding window opens completely. If the window still does not close when there is no obstruction, then hold the switch j down. The side window will then close without the obstruction sensor function. Warning! G Driver's door only: If within five seconds switch j is again pressed past the resistance point and released, the automatic reversal will not operate. G Stopping windows Press respective switch again. If you pull and hold the switch up when closing the window, and upward movement of the window is blocked by some obstruction including but not limited to arms, hands, fingers, etc., the automatic reversal will not operate. ! If the upward movement of the window is blocked during the closing procedure, the window will stop and open slightly. Remove the obstruction, press the switch j again past the resistance point and release. 145