2004 Mercedes ML-Class Owner's Manual - Page 267

Practical hints Replacing bulbs Rear lamps Lamp 6 Brake lamp 7 Backup lamp 8 Turn signal lamp Type 1073 (32 cp bulb) 1073 (32 cp bulb) PY 21 W Notes on bulb replacement Warning! Keep bulbs out of reach of children. Bulbs and bulb sockets can be very hot. Allow the lamp to cool down before changing a bulb. Halogen lamps contain pressurized gas. A bulb can explode if you: touch or move it when hot drop the bulb scratch the bulb Wear eye and hand protection. Because of high voltage in xenon lamps, it is dangerous to replace the bulb or repair the lamp and its components. We recommend that you have such work done by a qualified technician. Use only 12-volt bulbs of the same type and with the specified watt rating. G Switch lights off before changing a bulb to prevent short circuits. Always use a clean lint-free cloth when handling bulbs. Your hands should be dry and free of oil and grease. If the newly installed bulb does not light up, visit an authorized Mercedes-Benz Light Truck Center. Have the LEDs and bulbs for the following lamps replaced by an authorized Mercedes-Benz Light Truck Center: Additional turn signals in the exterior rear view mirrors Bi-Xenon lamps* Front fog lamps (vehicles with sport package)* 9 Tail, parking and P 21/4 W standing lamp Rear fog lamp, driver's side a Side marker lamp W5W b High mounted brake 1073 lamp (32 cp bulb) c License plate lamps C 5 W 267