2006 Mercedes CLK-Class Owner's Manual - Page 148

Controls in detail Control system Vehicle status messages have been recorded If conditions have occurred causing status messages to be recorded, the number of messages appears in the multifunction display: Should the vehicle's system record any conditions while driving, the number of messages will reappear in the multifunction display when the SmartKey in the starter switch is turned to position 0 or removed from the starter switch. With KEYLESS-GO*, turn off the engine by pressing the KEYLESS-GO* start/stop button and open the driver's door. Warning! G Malfunction and warning messages are only indicated for certain systems and are intentionally not very detailed. The malfunction and warning messages are simply a reminder with respect to the operation of certain systems and do not replace the owner's and/or driver's responsibility to maintain the vehicle's operating safety by having all required maintenance and safety checks performed on the vehicle and by bringing the vehicle to an authorized Mercedes-Benz Center to address the malfunction and warning messages ( page 383). i 1 Number of messages Press button k or j. The stored messages will now be displayed in the order in which they have occurred. For malfunction and warning messages, see "Vehicle status messages in the multifunction display" ( page 383). The vehicle status message memory will be cleared when you switch on the ignition( page 34). You will then only see high-priority messages in the multifunction display ( page 383). Press button è or ÿ repeatedly until the vehicle status message memory appears in the multifunction display. If the vehicle status message memory menu does not appear, then there are no messages stored. 147