2006 Mercedes CLK-Class Owner's Manual - Page 443

Practical hints Replacing bulbs High beam bulb for high beam flasher Turn housing cover 2 counterclockwise and remove it. Turn bulb holder 4 with the bulb counterclockwise and remove it. Pull the bulb at its socket out of bulb holder 4. Insert the new bulb so that its socket locates in the recess of bulb holder 4 and is level to it. Reinsert bulb holder 4 with the bulb in the lamp and turn clockwise. Align housing cover 2 and turn it clockwise. Front turn signal lamp bulb Turn bulb socket 1 counterclockwise and remove it. Press gently onto the bulb and turn counterclockwise out of bulb socket 1. Press the new bulb gently into bulb socket 1 and turn clockwise until it engages. Place bulb socket 1 back into the lamp and turn it clockwise. Parking and standing lamp bulb Turn housing cover 2 counterclockwise and remove it. Pull out bulb socket 5 with the bulb. Pull the bulb out of the bulb socket 5. Press the new bulb into bulb socket 5. Press bulb socket 5 back into the lamp. Align housing cover 2 and turn it clockwise. Additional turn signal lamps The additional turn signal lamps in the exterior rear view mirrors have LEDs. If a malfunction occurs or LEDs fail to function, the entire turn signal unit must be replaced. Have the additional turn signal unit replaced by an authorized Mercedes-Benz Center. Front side marker lamp Since replacing the side marker lamp bulbs is a technically highly demanding process, we recommend you have the side marker lamp bulbs replaced by an authorized Mercedes-Benz Center. 442