2006 Mercedes CLK-Class Owner's Manual - Page 452

Practical hints Flat tire Lowering the vehicle Lower vehicle by turning crank counterclockwise until the full weight of the vehicle is resting on the ground. Remove the jack. Warning! G Have the tightening torque checked after changing a wheel. The wheels could come loose if they are not tightened to a torque of 80 lb-ft (110 Nm). 1 - 5 Wheel bolts Tighten the five wheel bolts evenly, following the diagonal sequence illustrated (1 to 5), until all bolts are tight. Observe a tightening torque of 80 lb-ft (110 Nm). Before storing the jack, it should be fully collapsed, with handle folded in (storage position) ( page 415). Store the jack and the other vehicle tools in the trunk. 451